NOTE: FREE SHIPPING will apply to this item on orders that total more than $99. If this item is purchased individually shipping within the lower 48 is extra and cost is based upon package size, weight, and distance from SCP.
Installing a pair of stiffer poly rear sway bar mid-section bushings will make your stock bar act stiffer compared to the mushy rubber stock bushings. The benefit is no where as near as great as the larger Addco bars but certainly a great bang-for-the-buck considering their price!
This item is for a pair of 23mm rear mid-sections bushings. Refer to THIS LINK for a chart showing the factory sway bar sizes for the '89-97 Tbirds/Cougars.
We do recommend you should measure your rear sway bar to insure you get the correct size and an ordering mistake is not made. If your particular car has a bar that is slightly larger than 23mm you can purchase the smaller size and use a deburring bit on a air grinder or Dremel type tool to enlarge the hole. The poly material is easily machined away and a millimeter or two can easily be removed from the bore to fit every car.
