• Fits '89-95 Tbird SC & '89/90 XR7 with M5R2
• Engineered for precision shifts
• Shift throw reduced for quicker shifts
• 303 stainless steel stick
• CNC machined aluminum pivot housing
• Spherical bearing
• Accepts stock factory knob
• Direct bolt on installation

The ONLY alternative to the stock rubbery shifter, the B&M Ripper, is now obsolete.  B&M quite making these approximately a year.  That's the bad news.

The good news is that Super Coupe Performance has approached B&M to make a one time run of these awesome shifters for us and they agreed.  We are currently accepting $50 deposits towards the purchase of one of the last new #45058 Rippers available.  The total price will be $214.99 + shp. and the balance of total will be billed once the Ripper is shipped.  Reserve now as pricing will go up once we have them in stock.  The shifters are on order and are expected to be in shipped from the manufacturer the first week in July, 2009 so we are getting very close to receiving these.. 

GET 'EM WHILE YOU CAN!  Once they are gone, they're GONE!

Call us or email us to reserve your RIPPER!  Or you can order online here:

You have the option of paying the entire amount now, or you can simply put "$50 Deposit Only" in the Comments section during checkout and your card will only be billed that amount and the rest upon shipment.

Magnum Powers MPx Supercharger Case & Inlet Plenum

The perfect blower for every SC engine...from stock to highly modified.  You control the performance by choosing the amount of overdrive from the pulleys.  For stock applications we suggest a minimum of 10% overdrive and on well built engines we can offer up to 25% overdrive for massive power gains.

This new blower recently made over 390 rwhp on a test vehicle with typical modifications.  See the Magnum Powers website at http://www.magnumpowers.com/tbrd_MPx.php for a detailed look at the test vehicle and the dyno results.  This car's engine was well built, but nothing extreme and it made some HUGE POWER with the new MPx! 

Click here to purchase your new MPx Case and Inlet Plenum!

The MPx 90 cid Supercharger case is cast from 356-T6 aluminum.  This material is significantly stronger than the factory Eaton material. It has longer intake and exit port duration then the factory Eaton design allowing the supercharger to easily be spun much faster without loosing volumetric efficiency, which results in the generation of excessive heat.

In addition to the stronger material the MPx case has thicker wall thicknesses and a stiffening boss running the full length creating a very stiff case that will not flex while under load. Since the case is a new casting there is no reason to send your blower like the older MPII and MPIII designs for the conversion and porting. Simply order the case, which comes with a MP Intake Plenum, install your rotors, fill it with supercharger fluid and have fun.  Easy to follow instructions are included so virtually everyone can handle this POWER making upgrade.

Check out our "GARAGE SALE" link above for tons of great used and like new products.  We are clearing out the shop of miscellaneous parts that have accumulated over the years.

If you see something you like MAKE US AN OFFER via phone or Email!

More items are being added as we come across them and as we find time so check back often!

Click here to be taken to our GARAGE SALE!

 Featured NEW Item:  Front Suspension Support Brace

Applicable to all '89-97 Tbirds/Cougars and '93-98 Mark VIIIs !

The Heavy Duty Front Suspension Support Brace is designed to substantially increase the support of the front suspension pick-up points for alignment accuracy and consistency. The FSSB also stabilizes the front suspension while significantly improving the handling and feel of the car.

Click here to purchase your new Front Suspension Support Brace!

Works great in conjunction with the Lower Engine Control Brace. Purchase both for a quantum improvement in the stiffness of your front suspension!

An EASY bolt on item not requiring any welding!

    Featured NEW Item:  Magnum Powers Chin Spoiler

A MUST HAVE for every '89-93 SC/XR7 owner!!

EVERY Super Coupe/XR7 owner that has ever seen their car run warm has struggled with reducing coolant temperatures. Magnum Powers has the answer! Their new chin spoiler reduces coolant temperatures by grabbing air and pushing it into the radiator, intercooler, & AC condensor for significantly lower temperature readings and improved performance. This spoiler works well with the stock IC but also will make a huge improvement for those lucky owners who have the Magnum Powers front mounted intercooler systems or anyone with a custom made FMIC. FMIC owners should definitely have one of these deep chin spoilers!!

Click here to purchase your new Chin Spoiler!

 

These mount easily to the '89-93 Super Coupes/XR7s.

Air inlet temperatures will drop and engine coolant temperatures will drop allowing the car to run much cooler and safer. Some people have said that their cars ran hotter after they installed a FMIC but NO LONGER! Install this spoiler and all owners can watch your engine temps drop back to normal stock levels.